DIY Light Scrim Upgrade
I thought long and hard about getting a bigger lighting scrim. They are a super versatile tool from the strobist to the natural light shooter. They can block light, diffuse light, reflect light. In short, they rock the set. They are also ridiculously expensive to purchase commercially. I was searching for a DIY version and found Kevin Kubota’s to be about the best one out there. You can watch the informative YouTube vid here.
But I made some upgrades in the design. First of all, I found it was a lot cheaper to purchase the grey conduit rather than PVC for the main frame parts. They are the exact same size so you can still use all the same PVC fittings but the conduit is less money. Wee! 😎 Plus, it looks less distracting than white. And secondly, I found that the design for attaching the ripstop nylon to the frame was a bit lacking. If you only used it inside, it would be fine. But I do loads of outdoor work. So I needed a solution that would hold up to a Saskatchewan wind gust. I thought about it and concluded that the best way was to make basically a “fitted sheet.” I got some of the super awesome seamstress church ladies to sew me a 1 inch seam all the way around the outside edge of the material. Then I simply cut the corners off and fished the nylon elastic cord through it, tying it off to make it fit snuggly on the frame. It works like a charm! It goes together super quick and stays there, even in the wind.
You still have to be careful with it because it is basically a giant kite. But it works flawlessly and only costs a fraction of what the commercially available ones do. This is probably the only DIY thing I’ve ever made that I will continue to use on a long term basis because it’s a super slick design and it works fantastic! 😀
Check out these vids of Joe McNally using the same kind of product. The results are truly awesome!