So I just got the Nikon 24mm 1.8G lens. My overall Nikon kit was lacking a fast aperture wide angle option. So now the Nikon bag is full. I’m rounding out my 85mm & 50mm 1.8G collection with the 24mm. This compliments my 16-35mm f/4 & 70-200 f/4 with fast primes. I’m really pleased with the lens so far, though I haven’t sufficiently put the lens through it’s paces yet – it’s coming soon.
Here’s a couple of sample photos from it, focusing on bokeh & centre sharpness. This lens is phenomenal wide open. The bokeh is as good as it gets for a wide angle (which aren’t known for being cream-cheese soft).
I’ll focus on this 100% crop. This was shot wide open at ISO 800 with window light. The detail of the eye lashes is unreal! The lens stacks up really well on the D800. Shooting on anything less will be even better, as the D800 sensor is pretty tough on glass.
So there you go. More review to come on this one in the near future, but suffice it to say, the lens is fantastic sharp, and very light and manageable. 😎
I got an email from B&H that my 50mm f/1.4 has been back ordered. Swell. Who knows how long it will take to arrive now. Bummer. 😦 But, it’s grounds for a blog post. 🙂
What should you do when you buy a new lens?
First, take a look at it. Make sure that the mount on the back is OK, make sure the body of the lens isn’t cracked or damaged. Then inspect the front glass element for nicks or scratches. Take a flashlight/desk lamp and shine it through the lens while opening the aperture at the back to look for dirt or other big crap that might be inside the lens. Little dust isn’t such a big deal but huge chunks of stuff should be grounds for a return and exchange right away.
Most return policies on defective equipment are only at most 2 weeks from the company you bought it from so you want to do all these checks immediately so you can return any defective items to the seller rather than have to ship them off to Nikon or Canon. B&H was really good to me in that I got the lens on a Saturday, did my checks, found it to be defective and got a return (RMA) form Sunday.
After you have done the initial physical checks, it’s time to do actual lens focus/sharpness tests. I have already posted some links to YouTube vids that explain this process. [But here they are again for fun: Part 1; Part 2] The tests should be done immediately as defects will be very apparent. Do the can test to check for sharpness and then do the ruler test to check to see if the autofocus is on or not. There are lens tolerances that can be adjusted for on higher end camera bodies through the AF Fine Tune settings that can actually pull the auto focus back into alignment with where it should be. But, as in my case, if the focus is way out, then the lens is crap and it must go back from whence it came.
Don’t be a naïve sucker face. Do your lens tests and make sure you are getting the quality that you are paying for. The manufacturing process is pretty darned awesome, but the world is a sinful place and errors do creep in. Now if they could only come up with solution for speeding up back orders… 😉